Low Voltage Switchgear MNS630 EN assembled with modular components in a combined block design, suitable for power plants, substations, industrial facilities, high-rise buildings, residential areas, etc. It is used for converting electrical energy, distributing, and controlling equipment in electrical systems operating at AC frequencies of 50-60 Hz and rated voltages up to 660V.
Scope of Use
- Ambient temperature ≤ 40°C and ≥ -5°C, with an average temperature not exceeding 35°C over a 24-hour period
- Clean air with relative humidity not exceeding 50% at a maximum temperature of 40°C. Higher relative humidity is permissible at lower temperatures, such as 90% at 20°C, but attention should be paid to temperature changes, as condensation may occasionally occur
- Altitude Up to 2000m
- The MNS630 low voltage switchgear is suitable for transportation and storage at temperatures ranging from -25°C to 55°C, and can withstand up to 70°C for short durations (not exceeding 24 hours) without any irreversible damage. It can operate normally under standard conditions after exposure to these extreme temperatures
- When using this equipment on offshore oil rigs and in nuclear power plants, a separate technical agreement must be signed
Technical Specifications
Rated insulation voltage | ……………….. | 660V(1000)V |
Rated working voltage | ……………….. | 380V、660V |
Maximum working current of main and bus | ……………….. | 5000A |
The main bus is rated to withstand current | ……………….. | 100kA/1s |
Main-bus rated peak current tolerance | ……………….. | 220kA/0.1s |
Distribution busbar (vertical busbar) maximum working current | ……………….. | 1000A |
Distribution busbar (vertical busbar) peak current | standard | 102kA(maximum)/0.1s |
enhanced | 176kA(maximum)/0.1s | |
Protection grade | ……………….. | IP30-IP54 |
Cabinet Structure
The basic structure of the MNS low-voltage switchgear cabinet consists of C-shaped beams. The C-shaped beams are made from steel plates with E = 25mm for modular installation holes. All cabinet frames and internal partitions are galvanized and phosphatized. The surrounding door panels and side panels are coated with high-pressure electrostatic paint
Reputable Distributor of MNS630 EN Low-Voltage Switchgear
AutoRack is a reputable distributor of high-quality MNS630 EN low-voltage switchgear in Vietnam. Our products are always available in large quantities to meet customer demand. With four branches nationwide, AutoRack provides convenience for customers and saves delivery time, ensuring that products reach our customers promptly.
Reviews
There are no reviews yet.